top of page

Anode Cap

Used to seal the anode/lead wire connection

and provide strain relief 

     Joint Specialist's Anode Cap (AC) seals the critical connection between the anode lead wire and the anode.  The Anode Cap provides stress relief at the wire connection.  It seals and electrically insulates the end of the anode where the lead wire exits the anode.

    The Anode Cap is the ideal solution to prevent premature failure of the anode typically caused by corrosion of the wire connection.  Each cap is expanded to allow clearance for easy installation over the lead wire and the anode.  A rubber based sealant is coated on the inside of the cap.  The Cap is heated and shrunk to fit tightly on the anode and the anode wire.  During the heat shrink process, the anode cap shrinks to conform to the anode and wire while the sealant softens and bonds to their surfaces.   After cooling the cap remains durable and water tight.  The anode cap is designed to fit 2", 3" and 4" anodes. 

Contact us for quotes, technical questions or delivery information - 936/321-3333

Your details were sent successfully!

bottom of page